Free SDK
Stamp Hole
Support enterprise customization
Matching baseboard is available
Stock spcifications:
2GB lpddr4 +8GB emmc
4GB lpddr4 +32GB emmc
It can be widely used in TV boxes, smart screens and other fields.
Allwinner H618 Core Board Introduction
l This A1 stamp hole core board (TP-A1CS) uses Allwinner H618 as the main chip, 64-bit quad-core Cortex-A53 processor, main frequency 1.5GHZ, integrated Mali-G31GPU, with rich audio and video interfaces, can be widely used in TV boxes, smart screens and other fields.
l Supports encoding and decoding of multiple video formats, supports up to 8K@24fps H.265 decoding and 4K@25fps H.264 encoding, and supports up to 4K@60fps HDMI display output.
l Provides two memory and storage options, memory LPDDR4 optional 2GB/4GB, storage eMMC 3 options 8GB/32GB.
l Adopting stamp hole interface design, the board is only 40*40mm in size, small and exquisite, with 6 layers of black immersion gold. In addition to DDR, EMMC bus, LRADC, I0 is fully led out
l The peripheral interface is rich, and the core board leads out USB OTG/HOST, I2CSPI, PWM, I2S, HDMI, UART and other interfaces through stamp hole connection.
l Officially supports mainstream Android TV, Debain, Ubuntu operating system images, and can be applied to more than 6 different application environments.
l The matching Wildfire Luban Cat A110 whole board provides tutorials and SDK driver development kits, and the information is completely open source, which is convenient for users to use and secondary development.
H618 Core Board Parameters
l Main chip: Allwinner H618
l CPU: 4-core 64-bit Cortex-A53
l GPU: ARM Mali-G31
l Memory: Onboard LPDDR4, 2/4GB
l Storage: eMMC, 8/32GB, supports eMMC boot system
l Interface: In addition to DDR, EMMC bus, LRADC, 10 full leads, including GPI088, including 8 USB dedicated, 1 AP RESET reset pin, 1 Bluetooth enable, 1 WIFI enable, 1 FEL button
l PCB: 6 layers, immersion gold design
l Size: 40*40mm
Signal interface
l Network port: 1 Gigabit Ethernet
l JTAG: 1
l Audio: 1, left and right channels
l Serial port: 6
l 12C: 5
l SPI: 2
l PWM: 4
l 12S: 3
l USB OTG: 1
l USB HOST: 3
l HDMI: 1
l SD: 1
Matching Baseboard Is Available
H618 Motherboard Hardware parameters
1. CPU: Main chip: Allwinner H618, 4-core 64-bit Cortex-A53
2. GPU: Mali G31 MP2
3. Memory: Onboard LPDDR4, 2/4GB
4. Storage: eMMC, 8/32GB, supports eMMC boot system
5. Power interface: 5V@3A DC input, Type-C interface, can also be used to burn images
6. y Ethernet: 10/100/1000M adaptive Ethernet port
7. USB2.0: USB HOST Type-A interface*4
8. USB-OTG selection switch: Host when switched to Type-A, Device when switched to Type-C
9. HDMI: HDMI2.0 screen interface*1, supports 1920x1080@60fps under Linux system and 4096x2160@60fps under Android Tv system
10. Wifi+Bluetooth: Onboard support 2.4G/5.8G dual-band WiFi6+BLE5.0, model: AW869A
11. TF card holder: SD3.0 interface, supports up to 512GB, supports TF card boot system
12. I0 interface: 26 Pin 2.54 pin interface, supports GPIO, SPI, I2C, UART, PWM functions
13. Debug serial port: default parameter 115200-8-N-1
14. Audio: 3.5mm headphone interface*1;
15. Button: Reset button*1, user button*1
16. LED: Power indicator*1; System indicator"1
17. Infrared receiver: Support infrared remote control function
18. Fan interface: Support installation of 5V fan for heat dissipation
19. Size: 56*85mm
