RK3576 SBC Computer Introduction

1. The TP-3 rk3576 Board has strong performance and can be used as a high - performance single - board computer and embedded motherboard for various scenarios such as display, control, network transmission, file storage, and edge computing.

2. It uses the Rockchip RK3576 as the main chip, with a maximum main frequency of 2.2GHz. It integrates an octa - core processor consisting of four - core 64 - bit Cortex - A72 and four - core 64 - bit Cortex - A53, and an ARM Mali - G52 MC3 GPU. It supports 8K video decoding and 4K display output, has super - strong image processing capabilities, supports multi - camera input, multi - screen heterogeneous display, and has a built - in independent NPU to empower various AI scenarios.

3. It provides a variety of memory and storage combinations for selection. The on - board hardware configuration is balanced, and the application range is wide.

4. The built - in independent NPU computing power can reach 6TOPS, empowering various AI scenarios.

5. It has a high degree of integration and rich expansion interfaces, including Gigabit Ethernet ports, RGMII, USB3.0, USB2.0, Mini PCIe, Mini HDMI, MIPI screen interfaces, MIPI camera interfaces, audio interfaces, infrared receivers, SIM/TF card slots and other peripherals. 40 un - used pins are led out, and it is compatible with Raspberry Pi interfaces.

6. The official version supports mainstream operating system images such as Android, Debian, and Ubuntu, and can be applied to a variety of different application environments.

7. It is completely open - source, provides official tutorials, and provides complete SDK driver development packages, design schematics and other resources, allowing for easy and seamless getting - started.

RK3567 Board Hardware Configuration

a) Power Interface: 5V@4A DC input, Type - C interface (no data transmission capability)

b) Main Chip: RK3576 (Quad - core A72 + Quad - core A53, Mali - G52 MC3, 6.1 TOPS computing power)

c) Memory: 2/4/8GB, LPDDR4X (Other storage requirements can be customized)

d) Storage: 0/32/64GB, eMMC (Other storage requirements can be customized)

e) Ethernet:

- Gigabit Ethernet port *1, supports 10/100/1000Mbps data transmission rate.

- RGMII port *1, supports 10/100/1000Mbps data transmission rate and can be connected to the Wildfire RGMII Gigabit Ethernet module.

f) HDMI: HDMI2.1 output *1, supports multi - screen display with other screens, maximum resolution 4K@120fps

g) MIPI - DSI: MIPI screen interface *1, can be connected to the Wildfire MIPI screen, supports multi - screen display with other screens; single MIPI mode maximum resolution 2560*1600@60fps

h) MIPI - CSI: 2*15Pin BTB camera interfaces *5 (front *1, back *4), can be connected to the Wildfire MIPI camera

i) USB2.0: Type - A interface *3 (HOST)

j) USB3.0: Type - A interface *1 (HOST); Type - C interface *1 (OTG, as a firmware burning interface, supports DP protocol and can be used for multi - screen display with other screens)

k) PCIe Interface: Mini - PCIe interface, can be used with full - height or half - height WiFi network cards, 4G modules or other Mini - PCIe interface modules

l) SIM + TF Card Slot: Can insert SIM card and micro SD (TF) card simultaneously, supports TF card to start the system, up to 512GB, SIM card function requires a 4G module

m) 40 - Pin Pin Header: Compatible with Raspberry Pi 40 - pin pin header, supports PWM/GPIO/I²C/SPI/UART/CAN functions

n) Debug Serial Port: Default parameter 1500000 - 8 - N - 1

o) Audio: MIC*1, electret microphone; headphone output + microphone input 2 - in - 1 interface *1

p) Buttons: Power button *1; MaskRom button *1; Recovery button *1

q) LED: Power indicator *1; System indicator *1

r) Infrared Receiver: Supports infrared remote - control function

s) RTC: RTC power socket *1

t) Fan Interface: Supports installing a 5V fan for heat dissipation

RK3576 Board Details

What other boards do we have? Click here to see