This board is designed to support mechanical hard disk and power consumption considerations. The default design must be powered by 12V2 or above DC power supply. It does not support power supply with USB Type C port. Please note

RK3568 SBC Computer Introduction

This RK3568 board can be used as a high-performance single-board computer and embedded motherboard for display, control, network transmission, file storage, edge computing and other scenarios.

Use Rockchip RK3568 as the main chip, adopt 22nm process technology, the main frequency can reach up to 2.0GHz, integrate quad-core 64-bit Cortex-A55 processor and MaliG522EE graphics processor, support 4K decoding and 1080P encoding, support dual-frequency display, built-in independent NPU, can be used for lightweight artificial intelligence applications.

Provide a variety of memory and storage combinations to choose from, onboard hardware configuration is balanced, and the application range is wide.

The built-in independent NPU computing power can reach 1TOPS, which can be used for lightweight artificial intelligence applications.

It has high integration and rich expansion interfaces. It is equipped with dual Gigabit Ethernet ports, dual 2.5G Ethernet ports, HDMI, MiniPCle, SATA, USB3.0, USB2.0, MIPI screen interface and MIPI camera interface and other peripherals, which can give full play to the network performance of the processor and further expand the use scenarios of the board.

Officially supports mainstream Andriod 11, Debain, Ubuntu operating system images, which can be applied to a variety of different application environments.

Completely open source, providing official tutorials, complete SDK driver development kits, design schematics, etc. easy to get started.

RK3568 SBC Computer Parameters

Power interface: 12V@2A DC input, DC interface

Main chip :RK3568, Quad Cortex-A55，2.0GHz，Mali-G52

RAM: 1/2/4/8GB，LPDDR4/4x，1560MHz

Storage: 8/32/64/128GB，eMMC

Ethernet :2.5G Ethernet port*2; 10/100/1000M adaptive Ethernet port*2

HDMI: HDMI2.0 display interface, support dual-screen display with MIPI-DSI

MIPI- DSI: MIPI screen interface, wildfire MIPI screen can be plugged in, support dual-screen display with HDMI2.0

MIPI-CSI: MIPI-Camera interface

USB2.0: Type-A Indicates interface *1(HOST).

              Type-C interface *1(OTG), which is the firmware burning

 interface and shared with the power interface

USB3.0: Type-A port*1 (HOST)

PCIe interface: Mini-PCIe interface, can be used with WIFI network card, 4G module or other Mini-PCIe interface modules

SATA interface: Standard SATA interface

Hard disk power supply interface : supports 12V output

SIM card holder: The SIM card function needs to be used with a 4G module

40Pin interface: Compatible with Raspberry Pi 40Pin interface, supports PWM, GPIO, I²C, SPI, UART functions

Debug serial port:      Default parameter 1500000-8-N-1

TF deck: Support Micro SD (TF) card boot system, up to 128GB

audio port: Headphone output + microphone input 2 in 1 interface

SPK speaker interface: 1W power speaker can be connected

Button: Power button, MaskRom button; Recovery button

Infrared receiver: supports infrared remote control function

Fan interface: supports the installation of fans for heat dissipation

RTC battery interface: supports RTC function