Product Introduction

RK3588 single board computer is a powerful development board that can be used as a high-performance single board computer and embedded motherboard for display, control, network transmission, file storage, edge computing and other scenario.

2. Use Rockchip RK3588 as the main chip, using 8nm advanced process technology, with the highest main frequency up to 2.4GHz, integrating quad-core 64-bit Cortex-A76 and quad-core 64-bit Cortex-A55 for a total of eight-core processors and ARM Mali- G610 MC4GPU supports 8K video encoding and decoding and 8K display output. It has super image processing capabilities, supports multi-camera input, supports multi-screen differential display, and has a built-in independent NPU to empower various AI scenarios.

3. Provides a variety of memory and storage combinations to choose from, balanced onboard hardware configuration, and wide application range.

4. The built-in independent NPU has a computing power of up to 6TOPS, enabling various AI scenarios.

5. High integration, with rich expansion interfaces, equipped with Gigabit Ethernet port, USB3.0, USB2.0, MiniPCle, MiniHDMI, MIPI screen interface and MIPI camera interface, audio interface, infrared reception, TF card holder, etc. Set up, lead out 40Pin unused pins, compatible with Raspberry Pi interface.

Product Parameters

l  Power interface: 12V@2A DC input, DC5.5*2.1 interface

l  Main chip: RK3588 (quad-core A76+quad-core A55, Mali-G610, 6T computing power)

l  Memory: 4/8/16GB, LPDDR4X (other storage requirements can be customized)

l  Storage: 0/32/64/128GB, eMMC (other storage requirements can be customized)

l  Ethernet: Gigabit network port*2, supports 10/100/1000Mbps data transmission rate

l  HDMI: HDMI2.0 input*1, up to 3840x2160@60FPS; HDMI2.1 output*2, supports multi-screen display with other screens, maximum resolution 7680x4320@60Hz (8K resolution)

l  EDP: EDP screen interface*1, supports multi-screen display with other screens, the highest resolution is 3840x2160@60Hz

l  MIPI DSI: MIPI screen interface*2, supports multi-screen differential display with other screens: the maximum resolution in single MIPI mode is 1920*1080@60HZ

l  MIPI CSI: MIPI camera interface*6 (front*3, back*3)

l  USB2.0: USB-HOSTType-A interface*1; USB-OTGType-A interface*1

l  USB3.0: USB-HOSTType-A interface*2; USB-OTGType-C interface*1, can be used for firmware burning, supports DP1.4 protocol

l  PCle interface: Mini-PCle interface, can be used with full-height or half-height WIFI network cards, 4G modules or other Mini-PCle interface modules

l  M.2 interface: M.2EKEY interface*1, supports M.2 E-Key wireless network card module; M.2 M KEY interface*1, supports M.2 M-Key PCle3.0*4Lanes specification 2280 hard drive

l  SIM+TF card holder: SIM card holder*1, Micro SD (TF) card holder*1, supports TF card to start the system, supports up to 512GB, SIM card function needs to be used with 4G module

l  40Pin interface: Compatible with Raspberry Pi 40Pin interface, supports PWM/GPIO/PC/SPI/UART functions

l  Debug serial port: default parameter 1500000-8-N-1

l  Audio: Onboard MIC microphone*1; SPK speaker interface*1. Can be connected to 1W power speaker; headphone output + microphone input 2-in-1 interface*1

l  Buttons: Power button*1;MaskRom button*1;Recovery button*1;Reset button*1

l  LED: power indicator light*1; system indicator light*1

l  Infrared receiver: supports infrared remote control function

l  RTC: Onboard low-power RTC chip + RTC power socket*1

l  Fan interface: supports the installation of 5V or 12V fans for cooling