RV1106 Core Board Introduction

l  TP-RV1106 stamp hole core board is mainly for enterprise users and can be used for development in smart home, security monitoring, industrial automation, consumer electronics, Internet of Things and other fields.

l  Using Rockchip RV1106 as the main chip, CortexA7+MCU central processor, built-in independent NPU computing power can reach 0.5T/1TOPS@int8, with the camera can realize YOLO video real-time recognition, picture recognition and other functions.

l  Built-in low-latency video encoding module, up to 5M@30fps H264/H265 video 3) encoding, 4M@60fps JPEG/MJPEG encoding, and supports multiple bit rate control methods.

l  The board provides two memory configurations, RV1106G2/RV1106G3 optional, embedded DDR3L4 optional 128MB/256MB.

l  Adopting stamp hole interface design, only 35*35mm in size, small and exquisite, low power consumption, high performance, can easily run Linux system.

l  The peripheral interface is rich, and the core board leads to USB, I2C, SPI, PWM, 612S, ADC, Camera, LCD, UART and other interfaces through stamp hole connection.

l  The whole board (core board + baseboard) provides buildroot system image, the data is completely open source, and a complete SDK driver development package, PDF schematics and other resources are provided to facilitate user use and secondary development.

Hardware configuration

l  CPU: Main chip: RV1106, CortexA7+MCU

l  Memory: Embedded DDR3L, optional RV1106G2: 128MB/RV1106G3: 256MB

l  Storage: 256MB SPINAND FLASH

l  AI computing power: RV1106G2: 0.5TOPS@int8, RV1106G3: 1TOPS@int8

l  Interface: Except SPINAND FLASH, 10 are fully led out, including 84 GPIOs including 1 NPOR reset pin and 3 USB dedicated pins

l  PCB: 4 layers, immersion gold design

l  Size: 35*35mm

Signal pins

l  Network port: 1 100M Ethernet

l  Serial port: 6

l  I²C: 5

l  SPI: 2

l  ADC: 1

l  PWM: 12

l  I2S: 1

l  USB: 1

l  Camera: 2

l  JTAG: 1

l  LCD: 1

Matching Baseboard Hardware Parameters

l  CPU: Main chip: RV1106, CortexA7+MCU

l  Memory: Embedded DDR3L, optional RV1106G2: 128MB/RV1106G3: 256MB

l  Storage: SPI-NAND FLASH, capacity: 256MB

l  AI computing power: RV1106G2: 0.5TOPS@int8.RV1106G3: 1TOPS@int8

l  Display: 40Pin FPC interface 0.5mm spacing, 18bit RGB interface timing, can be directly connected to our 4.3/5/7-inch RGB interface capacitive screen through FPC cable

l  Camera: Two 2lanes MIPICSI input, single channel supports up to 5M@30fps input, dual channel supports up to 1080P@30fps simultaneous input

l  Power interface: 5V@1A DC input, Type-C interface, can also be used to burn images

l  Ethernet: 100M Ethernet port*1, supports 10/100Mbps data transmission rate

l  PCle interface: Mini-PCle interface*1, can connect PCIE network card using USB protocol communication

l  SIM card: SIM card holder*1, SIM card function needs to be used with 4G module

l  TF card holder: SD2.0 interface, supports up to 512GB, supports TF card boot system

l  USB2.0: USB HOST Type-A interface*2

l  USB-OTG: Host when switched to Type-A, Device when switched to Type-C

l  Selection switch

l  WiFi+Bluetooth: Onboard support 2.4GWiFi6+BT5.2 BLE, model: AIC8800DL30

l  IO interface: Pin2.54 pin interface, supports GPIO, SPI, I2C, UART, PWM function

l  Debug serial port: default parameter 115200-8-N-1

l  Audio: Microphone interface*2, dual-channel MIC input; speaker interface*1, single-channel SPK playback (left channel)

l  Buttons: Reset button*1; Burn button*1; ADC button*1

l  LED: Power indicator*1; System indicator*1

l  Size: 56*85mm

H618 Core Board Details