Free SDK
Core board+ carrier board
WiFi6+BT5.2
NPU-0.5T/1TOPS@int8
Can easily run Linux system
Provide buildroot system image, the data is completely open source
G2 version : NPU-0.5TOPS@int8; Memory-128MB DDR3L；Storage-256MB SPINAND FLASH
G3 version: NPU-1TOPS@int8; Memory-256MB DDR3L；Storage-256MB SPINAND FLASH
RV1106 Board Introduction
l The TP-RV1106 board is mainly aimed at makers and embedded entry-level developers, and can be used for development in a variety of fields such as smart home, security monitoring, industrial automation, consumer electronics, Internet of Things, education and entertainment.
l Use Rockchip RV1106 as the main chip, with single-band WiFi6+BT5.2 wireless module USB2.0 HOST, 100M Ethernet, TF card holder, MIPI camera, MIC, SPK and other peripherals, 30Pin configurable pins, support GPIO, SPI, I2C, UART, PWM functions.
l Built-in independent NPU computing power can reach 0.5T/1TOPS@int8, with the camera can realize YOLO video real-time recognition, picture recognition and other functions.
l Built-in low-latency video encoding module, can support up to 5M@30fps H264/H265 video encoding, 4M@60fps JPEG/MJPEG encoding, and supports multiple bit rate control methods.
l The board provides two optional memory configurations, with a size of only 56*85mm, small and exquisite, low power consumption and high performance, and can easily run the Linux system.
l Provides buildroot system image, completely open source data, tutorial documents, complete SDK driver development package, PDF schematics and other resources to facilitate user use and secondary development.
Hardware Parameters
l CPU: Main chip: RV1106, CortexA7+MCU
l Memory: Embedded DDR3L, optional RV1106G2: 128MB/RV1106G3: 256MB
l Storage: SPI-NAND FLASH, capacity: 256MB
l AI computing power: RV1106G2: 0.5TOPS@int8.RV1106G3: 1TOPS@int8
l Display: 40Pin FPC interface 0.5mm spacing, 18bit RGB interface timing, can be directly connected to our 4.3/5/7-inch RGB interface capacitive screen through FPC cable
l Camera: Two 2lanes MIPICSI input, single channel supports up to 5M@30fps input, dual channel supports up to 1080P@30fps simultaneous input
l Power interface: 5V@1A DC input, Type-C interface, can also be used to burn images
l Ethernet: 100M Ethernet port*1, supports 10/100Mbps data transmission rate
l PCle interface: Mini-PCle interface*1, can connect PCIE network card using USB protocol communication
l SIM card: SIM card holder*1, SIM card function needs to be used with 4G module
l TF card holder: SD2.0 interface, supports up to 512GB, supports TF card boot system
l USB2.0: USB HOST Type-A interface*2
l USB-OTG: Host when switched to Type-A, Device when switched to Type-C
l Selection switch
l WiFi+Bluetooth: Onboard support 2.4GWiFi6+BT5.2 BLE, model: AIC8800DL30
l IO interface: Pin2.54 pin interface, supports GPIO, SPI, I2C, UART, PWM function
l Debug serial port: default parameter 115200-8-N-1
l Audio: Microphone interface*2, dual-channel MIC input; speaker interface*1, single-channel SPK playback (left channel)
l Buttons: Reset button*1; Burn button*1; ADC button*1
l LED: Power indicator*1; System indicator*1
l Size: 56*85mm
Product Details
Matching Core Board Description
The board consists of a core board and a carrier board
Core Board Hardware configuration
l CPU: Main chip: RV1106, CortexA7+MCU
l Memory: Embedded DDR3L, optional RV1106G2: 128MB/RV1106G3: 256MB
l Storage: 256MB SPINAND FLASH
l AI computing power: RV1106G2: 0.5TOPS@int8, RV1106G3: 1TOPS@int8
l Interface: Except SPINAND FLASH, 10 are fully led out, including 84 GPIOs including 1 NPOR reset pin and 3 USB dedicated pins
l PCB: 4 layers, immersion gold design
l Size: 35*35mm
Core Board Signal pins
l Network port: 1 100M Ethernet
l Serial port: 6
l I²C: 5
l SPI: 2
l ADC: 1
l PWM: 12
l I2S: 1
l USB: 1
l Camera: 2
l JTAG: 1
l LCD: 1
