Product Introduction

l  TP-2 development board can be used as a high-performance single-board computer and embedded motherboard for display, control, network transmission, file storage, edge computing and other scenarios.

l  Using Rockchip RK3568 as the main chip, it adopts 22nm process technology, with a main frequency of up to 2.0GHz, integrated quad-core 64-bit Cortex-A55 processor and MaliG522EE graphics processor, supports 4K decoding and 1080P encoding, supports dual-frequency display, built-in independent NPU, can be used for lightweight artificial intelligence applications.

l  Provides a variety of memory and storage combinations to choose from, balanced onboard hardware configuration, wide range of applications.

l  Built-in independent NPU computing power can reach 1TOPS, which can be used for lightweight artificial intelligence applications.

l  High integration, with rich expansion interfaces, with dual Gigabit network ports, HDMI, USB3.0, MINIPCI-E, M.2 interface, MIPI and other peripherals, further expands the use of the board, and the small body can also burst out great performance.

l  Officially supports mainstream Andriod 11, Debain, Ubuntu operating system images, and can be applied to a variety of different application environments.

l  Completely open source, providing official tutorials, complete SDK driver development kits, design schematics and other resources.

Product Parameters

l  Board name: RK3568 TP-2

l  Power interface: DC interface 5V@3A DC input or Type-C interface 5V@3A DC input

l  Main chip: RK3568 (quad-core Cortex-A55, 2GHz, Mali-G52)

l  Memory: 1/2/4/8GB LPDDR4/LPDDR4X 1560MHz

l  Storage: 8/32/64/128GBeMMC

l  Ethernet: 10/100/1000M adaptive Ethernet port x2

l  USB2.0: Type-A interface x1 (HOST); Type-C interface x1 (OTG), which is the firmware burning interface and is shared with the power interface

l  USB3.0: Type-A interface x1 (HOST)

l  Debug serial port: default parameters 1500000-8-N-1

l  Buttons: ON/OFF (power on/off key), MaskRom (burning) button, Recovery button

l  Audio interface: Headphone output + microphone input 2-in-1 interface

l  SPK speaker interface: can connect 1W power speaker

l  40Pin interface: compatible with Raspberry Pi 40Pin interface, supports PWM, GPIO, I2C, SPI, UART functions

l  M.2 interface: M Key type, PCIE3.0x2Lanes, can be plugged in 2280 specification NVME solid state drive

l  MiniPCle interface: can be used with full-height or half-height WIFI network card, 4G module or other Mini-PCle interface module

l  SATA interface: SATA cable interface, needs to be used with adapter board, can support 5V powered SATA interface hard disk

l  SIM card holder: needs to be used with 4G module

l  HDMI2.0 interface: display interface, supports dual-screen display with MIPI-DSI, the highest resolution is 4096*2160@60HZ

l  MIPI-DSI interface: MIPI screen interface*2, can be plugged in MIPI screen, support dual-screen display with HDMI2.0, single MIPI mode, maximum resolution 1920*1080@60Hz

l  MIPI-CSI interface: MIPI camera interface*2, can be plugged in IMX415/OV8858 camera

l  TF card holder: support Micro SD (TF) card to start the system, up to 512GB

l  Infrared receiver: support infrared remote control function

l  RTC battery interface: support RTC function

l  Fan interface: support installation of fan cooling