Product Introduction

l  TP-1-RK3566 Board (BTB) can be used as a high-performance single-board computer and embedded motherboard for display, control, network transmission, file storage, edge computing and other scenarios.

l  Using Rockchip RK3566 as the main chip, it adopts 22nm process technology, with a maximum frequency of 2 up to 1.8GHz, integrated with quad-core 64-bit Cortex-A55 processor and Mali G52 2EE graphics processor, supports 4K decoding and 1080P encoding, built-in independent NPU, can be used for lightweight artificial intelligence applications.

l  Provides a variety of memory and storage combinations to choose from, balanced onboard hardware configuration, wide range of applications.

l  Built-in independent NPU computing power can reach 1TOPS, which can be used for lightweight artificial intelligence applications

l  High integration, with rich expansion interfaces, with Gigabit Ethernet port, HDMI, eDP, MiniPCle, USB3.0, USB2.0, MIPI screen interface and MIPI camera interface, audio interface and other peripherals, can give full play to the performance of the processor, further expanding the use of the board.

l  Officially supports mainstream Android 11, Debain, and Ubuntu operating system images, and can be applied to a variety of different application environments.

l  Completely open source, providing official tutorials, complete SDK driver development kits, design schematics and other resources, you can easily get started without blind spots.

Product Features

1.     The RK3566 core board (TP-1) BTB core board pin sequence is compatible with RK3568 core board (TP-2) BTB core board pin sequence. Replacement between RK3566 and RK3568 is easy.

2.     Free SDK, Open source baseboard Cadence schematics, PCB source files, and packages

3.     Industrial-grade core boards and development boards accept batches

4.     HDMI/MIPI DSI/eDp/LVDS supports multi-interface single-screen output

Product Parameters

Tp-1 RK3566 btb core board parameters

l  Connector: Male: SGDBM-05-80P-H10 Female: SGDBF-05-80P-H30

l  Main chip: RK3566 (quad-core Cortex-A55, 1.8GHz, Mali-G52)

l  IO: BTB leads to 320 pins, 0.5mm pitch, leads to all I0

l  Memory: 1/2/4/8GB, LPDDR4/4x, 1056MHz

l  Storage: 8/32/64/128GB, eMMC

Tp-1 RK3566 btb base board parameters

l  Connector: Male: SGDBM-05-80P-H10 Female: SGDBF-05-80P-H30

l  Power interface: 12V@1A (1A and above) DC input, DC interface

l  Ethernet: 10/100/1000M adaptive Ethernet port*1

l  HDMI: HDMI2.0 screen interface*1*1, maximum resolution 4096*2160@60HZ

l  LVDS: LVDS screen interface*1, single channel 8bit

l  MIPI-DSI: MIPI screen interface*1, can be connected to our store's 5.5 inch/ 7 inch/10.1 inch sbc exclusive screen, single MIPI mode maximum resolution 1920*1080@60HZ

l  MIPI-CSI: MIPI camera interface*2, can be plugged into our store's IMX415/OV8858 camera

l  eDP ：eDP1.3 screen interface*1, eDP touch interface*1

l  USB2.0： Type-A interface*3(HOST); Type-C interface*1(OTG), firmware burning interface

l  USB3.0： Type-A interface*1(HOST)

l  WiFi+Bluetooth： Onboard WiFi Bluetooth module, model:RTL8821CU

l  PCle interface: Mini-PCle interface, can be used with full-height or half-height WIFI network card, 4G module or other Mini-PCle interface module

l  SIM card holder: SIM card function needs to be used with 4G module

l  12C： 12C*2

l  Serial port:

l  Debug serial port*1(UART2) default parameter 1500000-8-N-1; LVTTL serial port*2(UART7&UART9); RS232*2(UART3&UART4);

l  RS485*2(UART1&UART6)

l  TF card holder: Support Micro SD (TF) card boot system, supports up to 512GB

l  Audio: Audio output, 3.5mm audio socket * 1 (green); Audio input, 3.5mm audio socket * 1 (red); SPK speaker interface * 1, can connect 1W power speaker

l  Button: Power button; Reset button; Recovery button; SARADC button

l  Infrared receiver: Support infrared remote control function

l  RTC: RTC power socket * 1

l  Fan interface: Support installation of 5V fan cooling